D06 Automatic Series D

D06 Semi Automatic
Power
pneumatic
Stapling head
6 x C 13 - 30/80
Staples
M C 30 SS
Load capacity
6 x 5000 pcs.

D06 Semi Automatic Stapling Machine
SGR C 13-30/6/ELR with 6 heads.
Stapling Machine for Stapling Alu-Sheets.

Application range
 

An aluminium sheet is being set into a provided empty space of an assembling table and the plastic supporting piece will be put on top.
 
By means of a pneumatic two-hand valve the stapling of 6 stapling heads C 13 - 30/80 will be released  and both parts are fastened  together with 6 staples.  When stapling is completed the work-piece can be removed and stored in a container below.

Output: approx. 5 – 7 units/minute (depending on handling).
2 seconds/unit and 6 staples.

Technical Description

•  6 Stapling Head > C 13 - 30/80.
•  Loading capacity of 1 stapling head: 5000 coiled staples.
•  Coiled staples M C 30 SS.
•  Reloading time for 1 coil: less than 1 minute. 
•  Frame with protective doors.
•  Safety glazing.
•  Assembling table to receive work-piece.
•  20 l pressure tank to compensate pressure oscillations.
•  Pneumatic maintenance unit.

See also > Stapling Heads for coiled staples > C 13.

Power source
pneumatic
Control
Taktstufensteuerung
Tension
415 V, 50 Hz
Airpressure
6 bars
Air consumption per stapling at 6 bar
ca. 50 Ltr./Min
Dimensions W x D x H
2200 x 1500 x 1900 mm
Noise pressure level
< 70 db
Weight
ca. 1700 kg
Stapling head
6 x C 13 - 30/80
Load capacity
6 x 5000 pcs.
Stapling head reloading
within 1 minute
D06 Semi Automatic Stapling Machine SGR C 13-30/6/ELR with 6 heads. Stapling Machine for Stapling Alu-Sheets.
Stapling Head for coiled staples (13 mm crown, 1.0 mm wire). For stationary use in stapling devices and special purpose machines for stapling and nailing all kind of materials.
Staple Remover MORI.
To remove larger staples from cardboard boxes.

M C 30 SS

for stapling head C 13 - 30
A = crown:
13,00 mm
coil:
5.000 pcs.
B = leg:
8,50 mm
carton:
60.000 pcs.
C = wire:
1,00 mm
info:
stainless steel