Serie A = carton stapling Serie B = carton tray stapling
Serie C = diverse - stapling or nailing Serie D = automotive - stapling

D09 Automatic Series D

Weight
950 kg
Version
pneumatic
Staple
Crown: 20 mm
Leg: 11 mm
Load capacity
8 x 5000 pcs pcs.

D09 Semiautom.stapling machine with 8 heads A 20
For fastening an aluminum plate with a plastic part.
SGR 8/A20-42/8X/L 551/AU.

Application range

The stapling table is manually extended from the machine. This movement is supported by a pneumatic cylinder.

The aluminum carrier part is inserted manually into the stapling table and then the absorber mat is placed manually on the aluminum carrier part.

The alignment is effected by placing the parts against a stop / centering pin.

 Then the stapling table is again manually inserted into the machine. This movement is also supported by a pneumatic cylinder.The stapling device is released by means of the TWO-HAND valve. Depending on the setting, 1-8 staples can be applied simultaneously. When the stapling has been effected, the stapling table will be extended and the fastened component can be removed. 

Performance: 2.5 parts / minute with 8 staples including handling of parts as to insertion and removal of the stapled part.

Technical Description

for stapling machine D09 (SGR/A20-42/8X/L 551/AUT)

• With 8 pneumatic stapling heads A 20 - 42/80.
• 5000 stainless staples on a coil.
• Reloading time of one staple coil in less than one minute.
• Pedestal with safety glazing.
• Stapling table with handling device.
• Control pneumatic.
• Equipped with 20 liter pressure tank for compensation of air fluctuations.
• Pneumatic maintenance unit.
• Machine dimensions W x D x H 1772 x 2180 x 2150 mm.
• Working height 1000 +/- 150 mm.

See also > Automatic Stapling Machines > D01-D09, as well as
> Stapling Device with arm > SGR 1 / QE / A 20 - 42 / VT.
 
Version
pneumatic
Control
pneumatisch
Airpressure
6 bars
Air consumption per stapling at 6 bar
70 Ltr.NL/min
Noise pressure level
<70 db
Weight
950 kg
Stapling head
8 x A 20 - 42/80
Load capacity
8 x 5000 pcs pcs.
Stapling head reloading
within 1 minute
D09 Semiautomatic stapling machine with 8 stapling heads. For fastening an aluminum plate with a plastic part.
Stapling Head for coiled staples (20 mm crown, 1.5 mm wire). For stationary use in stapling devices and special purpose machines for stapling and nailing all kind of materials.
Staple Remover MORI.
To remove larger staples from cardboard boxes.

M A 42 S

for stapling head A 20 - 42
A = crown:
20,00 mm
coil:
5.000 pcs.
B = leg:
11,00 mm
carton:
40.000 pcs.
C = wire:
1,50 mm
info:
stainless steel