Serie A = carton stapling Serie B = carton tray stapling
Serie C = diverse - stapling or nailing Serie D = automotive - stapling

A02 Automatic Series A

Crown: 22 mm
Leg: 18 mm
Load capacity
4000 pcs.

A02 Stapling Machine with 4 Blindstapling-Heads E 24.
TOP closure of telescopic-type boxes.
SHM E 24-60/4SX.

Application range

The boxes made from corrugated cardboard in differing sizes have already been separated from each other with a minimum distance of 50 mm and are introduced one after the other into the stapling device. The size of the boxes are automatically detected. The motorized roller conveyor stops the box at the stapling position.

A lifting device elevates the box into the stapling position of the stapling heads and the stapling is released (4 stapling operations simultaneously).

The staples are positioned concentric at all four sides of the box.
Then the box will be put back onto the roller conveyor again which drives the box out of the stapling machine and the next box is already been driven in.

Technical Description

•  Capacity 6 - 7 boxes / minute.
•  Automatic detection of the different box sizes during operation.
•  Equipped with 20 l pressure tank to compensate pressure fluctuations.
•  Height of roller conveyor: 825 mm.
•  Fitted with 2 stapling heads E 24-60*.
•  High loading capacity. 
•  Each head for 4000 coiled staples TOP E 60 4.
•  Reloading a head within 1 minute.

Blind Stapling

• The staple is automatically clinched without clinching anvils.

• No additional stitching holes next to the staple which would destroy the
   cardboard partially and diminish the rigidity of the box.
• A box closed with TOP blind stitch makes a better optical impression.
• No damage to the contents as the staple is clinched within the
  under board without penetrating completely through.
• No clinching anvils which are mainly subject to wear and tear,
   thus higher availability and less susceptibility to repair.

* See also Stapling Heads for coiled staples > E 24

415 V/50 Hz
4 - 6 bars
Air consumption per stapling at 6 bar
2.4 Ltr.NL for 1 stapling head
Device dimensions (L x W x H)
2700 x 1750 x 1650 mm
Noise pressure level
< 70 dB
Stapling head
4 x E 24 - 60
Load capacity
4000 pcs.
Stapling head reloading
within 1 minute
For following sizes
Box: L 325-435, W 290, H 70 - 320 mm
A02 Stapling Machine SHM E 24-60/4SX TOP closure of telescopic-type boxes.
Blindstapling Head for coiled staples (22-26 mm crown, 2 mm wire) for stationary use in stapling machines for box bottom, top closing of filled cartons and top closing of telescopic-type boxes.
Staple Remover MORI.
To remove larger staples from cardboard boxes.

TOP E 60 4

for stapling head TOP E 24 - 60
A = crown:
22,00 mm
4.000 pcs.
B = leg:
18,00 mm
16.000 pcs.
C = wire:
2,00 mm