B 36

Weight
from 7.3 kg
Version
pneumatic
Coiled staple
Crown: 36 mm
Leg: 12, 17, 21 mm
Load capacity
4000 pcs.

Stapling Head for coiled staples (36 mm crown, 2.0 mm wire). For stationary use in stapling devices and special purpose machines for stapling carton and all kind of materials.

Application range

Complete pneumatic stapling or nailing unit with automatic feed movement for the stationary use in stapling devices and special purpose machines. For stapling all types of cardboard, paper, plastics, film, leather.
 
See also Automatic stapling machines > A06 and B01 - B05.

Technical description

The coiled staples, their holding fixture, and the air cylinder are moved neither during the feeding travel (A) nor during the stapling (not in case of 150 mm feed travel). This makes possible high-speed stapling, as the force, due to inertia, remains low. 

                                                   

• Stapling in every position.
• Various anvils available for stapling.
• Different stroke/feed paths (A) up to 40, 80 or 150 mm.
• Head is operated as by any double effective air cylinder.
• Available in left or right version.
• The mounting can be performed using a centring pin (B), or with
   threaded bore holes(C) located laterally on the bottom of the cylinder.
• Loading capacity (D): 4000 coiled staples.
• Reloading time of a staple coil in less than one minute.

Optional sensors (E)

The following sensors are available for an automated application:

Initial position: Query of the base position of the stapling head.
Staple reserve: Notification about the remaining of approx.
  100 – 200 staples on the roll, reloading must be carried out soon.
Staple ejection*: Control query whether a staple was discharged
   through the discharge channel.
   *Not available for stainless steel staples (SS).
Staple end: Message about the remainder of about 20 – 30 staples,
   with reloading immediately required.

Serie of Stapling Heads B 36:

Heads with up to 40, 80 or 150 mm feed travel
for coiled staples with 36 mm crown and 2.0 mm wire.
B 36 - 60 = 12 mm;
B 36 - 70 = 17 mm leg length;
B 36 - 78 = 21 mm leg length.

B 36 - 60 for coiled staples MG®B 60 4
B 36 - 70 for coiled staples MG® B 70 4
B 36 - 78 for coiled staples M B 78 4
                 4 = 4000 staples / coil 

Version
pneumatic
Airpressure
4 – 6 bars
Air consumption per stapling at 6 bar
2,8 NL
Device dimensions (L x W x H)
from 270 x 106 x 339 mm
Weight
from 7.3 kg
Load capacity
4000 pcs.
Stroke/feed path in mm
up to 40, 80, 150 mm
Wire diameter/cross section in mm
2 x 1 mm
Staple Remover MORI.
To remove larger staples from cardboard boxes.

MG® B 60 4

for stapling head B 36 - 60
A = crown:
36,00 mm
coil:
4.000 pcs.
B = leg:
12,00 mm
carton:
16.000 pcs.
C = wire:
2,00 mm
info:

MG® B 70 4

for stapling head B 36 - 70
A = crown:
36,00 mm
coil:
4.000 pcs.
B = leg:
17,00 mm
carton:
16.000 pcs.
C = wire:
2,00 mm
info:

M B 78 4

for stapling head B 36 - 78
A = crown:
36,00 mm
coil:
4.000 pcs.
B = leg:
21,00 mm
carton:
16.000 pcs.
C = wire:
2,00 mm
info: