C01 Stapling Machine SGR 3/B 36 - 78
with 3 Stapling Heads. Stapling Carton Sleeves on Carton Flaps
With 3 linear moveable stapling heads B 36-78.
2 up to 4 cardboard sleeves can be mounted onto the folding box.
Sequence of operations:
The stapling device will be adapted manually according to the box size and up to 4 prefolded cardboard sleeves are being put on the arms with the stapling anvils.
The folding box will be introduced into the carriage, the flap has to be folded and pushed over the stapling anvils against the stop. The stapling device will be activated and conveys to the assigned 4 up to 8 stapling positions and applies 2 times up to 3 staples (corresponds
to 2 up to 4 sleeves).
Two stapling operations with up to 3 staples each are released at each sleeve. The carton with the attached cardboard sleeves will be removed from the device, turned manually by 180° and another four sleeves are manually put over the stapling anvils and the 2. flap can be pushed over the stapling anvils back to the stop.The ready carton pallet can now be removed from the stapling device.
• 4 Stapling heads for coiled staples: B 36 - 78.
• Loading capacity of 1 stapling head: 4000 coiled staples.
• Coiled staples M B 78 4.
• Reloading time for 1 coil: less than 1 minute.
• Adjustable for different carton sizes.
• Main frame with safety doors.
• 1 Electromechanical axis.
• Equipped with 4 castor wheels for easy moving.
• Equipped with 20 l pressure tank to compensate pressure oscillations.
Carton dimensions for carton container and sleeves:
Flap width: up to 2490 mm.
Length of sleeves: 155 – 530 mm.
Width of sleeves: 106 mm.
Carton height including 1 flap: up to 1700 mm.
Number of sleeves: 2 – 4 pieces.
Floor space required: approx. 3 x 1.4 m².
Operating height/anvil height: max. 1700 mm.
The control which can be programmed for up to 940 different carton sizes.