D05 Automatic Series D

D05 Semi Automatic
Power
pneumatic
Stapling head
6 x A 20 - 42/80
Staples
M A 42 SS
Load capacity
5000 pcs.

D05 Semi Automatic Stapling Machine
SGR 6/A 20-42/80/AUT with 6 heads.
Stapling Alu-Sheets onto Plastic Parts.

Application range

Fastening aluminium heat shield sheets onto plastic supports.
An aluminium sheet is being set into a provided empty space of an assembling table and the plastic supporting piece will be put on top.
 
By means of a pneumatic two-hand valve the stapling of 6 stapling heads A 20-42/80 will be released and both parts are fastened together with 6 staples. When stapling is completed the work-piece can be removed and stored in a container below.
 
Output: 2 seconds/unit and 6 staples =
5-7 units /minute (depending on handling,

Technical Description

•  6 pneumatic Stapling Heads A 20 – 42/80.
•  5000 stainless steel coiled staples / coil.
•  Reloading one head within 1 minute.
•  Frame with protective doors.
•  Safety glazing. 
•  Assembling table to receive work-piece. 
•  Equipped with 20 l pressure tank to compensate pressure oscillations.
•  Pneumatic maintenance unit.
 
See Stapling Heads for coiled staples > A 20.
See also Automatic Stapling Machines > D01-D07, as well as
Stapling Device with arm > SGR 1 / QE / A 20 - 42 / VT.
 
Power source
pneumatic
Airpressure
6 bars
Air consumption per stapling at 6 bar
ca. 50 Ltr./min
Dimensions W x D x H
ca, 1600 x 1000 x 1900 mm
Noise pressure level
< 70 db
Weight
ca. 1500 kg
Stapling head
6 x A 20 - 42/80
Load capacity
5000 pcs.
Stapling head reloading
within 1 minute
Stapling Head for coiled staples (20 mm crown, 1.5 mm wire). For stationary use in stapling devices and special purpose machines for stapling and nailing all kind of materials.
Staple Remover MORI.
To remove larger staples from cardboard boxes.

M A 42 SS

for stapling head A 20 - 42
A = crown:
20,00 mm
coil:
5.000 pcs.
B = leg:
11,00 mm
carton:
40.000 pcs.
C = wire:
1,50 mm
info:
stainless steel